Oliver 10047VS, Owner'S Manual, Page: 19 / 58

10047VS Shaper OLIVERMACHINERY.NET
19 |
Page
Controls and Operation
Control Panel Overview
Emergency Stop
Emergency stop button stops the machine and prevents unintentional restarts.
Once pressed, the shaper will stop, and the emergency stop button will have to be
reset before the shaper can be restarted. To reset, rotate the button clockwise until
it pops up.
Magnetic Power Switch
Press this button to power on the shaper so it is ready to run.
NOTICE:
This magnetic switch will automatically shut off upon power outage. This
prevents unintentional restarts when power resumes.
To restart the machine after a power outage, set spindle direction switch to OFF
position, and set spindle speed to minimum, then press the power button to power
on the machine.
Machine Status Indicator
Indicates if the motor is ready to run. If the “ALARM” light is
on, motor will not start. Hit STOP button and wait for 1 minute
for the machine to reset.