Oldham MX62, User Manual

Page: 52 / 74

Page 52
7.6. Analog output module (AAM)
Different addresses between 1 and 8 have to be allocated to the AAMs with the
help of the fitted rotary switch.
Each output has a pertaining jumper by which 0-10 V or 4-20 mA can be
selected.

left position : 0
–
10 V

right position : 4
–
20 mA
The last output module (whether it is a relay or analog output module) has to
form a bus end for both signal buses (redundancy). This is done with the two
jumpers on the upper right-hand side.

left position : end of bus

right position : further output modules
Module size: 160 x 90 x 50 mm