Oldham MX62, User Manual

Page: 16 / 74

Page 16
2.1.9. Analog input extension module (AEAM)
The AEAM is intended for the connection of smoke detectors. It is
possible to connect up to 8 smoke detectors at each AEAM.
The AEAM is an extension module and has to be plugged on the AEM.
ATTENTION!
It is not allowed to connect gas detectors to the AEAM.
2.1.10. LCD copy module
The LCD copy module is a modified LCD module. It offers the possibility
to connect additional LCD displays (max. 30) to the display bus of the
WinPro
®
/ MX62.
The LCD copy modules have to be use only in combination with a
standard LCD module (software version 2.05 or higher in needed).
In opposition to the LCD module it offers no data logging functionality
and any interaction.
In normal operation mode it displays the logo of the company and the
date. The backlight is off.
Each alarm on one of the 64 channels will be displayed by the LCD
module and the LCD copy modules. The backlight will be activated
automatically.
If there is more than one alarm at the same time, the affected channels will
be displayed alternating for ten seconds.
The LCD copy module is subordinated to the LCD module. During
interaction with the standard LCD module, e.g. a user wants to see
information about one channel by pushing the channel button, the LCD
copy module still shows the logo of the company, even if there is an
alarm.
System messages are displayed by four LEDs.
The LCD copy modules are addressable (software V 2.18 or higher). The
addresses are set during production. By setting a address it is possible to
display the alarms selective. Modules with the address
0 are showing all
messages. The configuration of selective messages has to be done by the
software
ConfigPro .
2.1.11. MIMIC Module
It is possible to copy the LED modules by using MIMIC modules.
The MIMIC module has to be connected to the display bus of the system
WinPro
®
/ MX62.