Oldham MX62, User Manual

Page: 40 / 74

Page 40
Show events:
All events are shown in chronological and declining order, i.e. the most
recent events come first.
The channels are indicated on the LED module according to their
configuration, e.g. A03 means
rack A, channel 3 .
As to the display of relays, first the module address and then the relay
number is shown, e.g. M8 R3 means
relay module 8, relay No. 3 .
Delete events:
In this menu item, all stored events are deleted.
4.2.11. Datalogger / 8-hour mean values
After selecting the respective channel with the aid of the arrow buttons,
stored mean values are shown.
For this, however, the recording of mean values need to be activated for
the respective channel by the configuration software
ConfigPro .
4.2.12. Datalogger / Format
On the one hand, this menu item can be used to format the memory card.
On the other hand, general information of the memory card is shown.
4.2.13. Printer settings
The printer can be activated or deactivated.

Activation or deactivation of the printer can only be effected if the
rotary switch on the controller module is not in position 5 (PC
communication).
4.2.14. LCD settings
LCD settings can be modified by this menu item. For this, the entry to be
modified is selected by the arrow buttons, after which the button
OK is
operated.
Language:
The menu language of the LCD can be selected. Options are: English,
German, French, Spanish and Dutch.
ATTENTION!
Changing the language only refers to the menu structure. Designations regarding
channel information such as measuring point description, target gas etc. are not
affected. Such designations can only be changed with the aid of the
configuration software
ConfigPro .