8
the instrument. Not following these instructions can result in damage or breakdown
of the device and its accessories.
The products labels can be found on the rear panel of the Main Unit.
Do not exceed voltage indicated in this manual and on the product label.
Avoid excessive induction noise, static electricity, magnetic fields.
Do not expose this instrument to rain or moisture.
Prevent throttling and kinking of cables.
Some equipment parts may reach temperatures above 50°C. Please be careful
when handling it.
Check that the cables are well inserted into their connectors so they cannot slip off
This device is not intended for medical use
The display should not be rubbed with abrasive materials or hard objects as it may
be damaged.
Power cord of unit should be unplugged from electrical outlet when left unused for
long period of time.
VENTILATION, please make sure the vents on the unit are not blocked in any way
either partially or fully.
Unit should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances or processes that produce heat
Do not start up the equipment if the supply cable is damaged.
Connect the equipment only to grounded mains power socket.
Do not disconnect cables while in operation.
Do not open the unit. Do not remove cover or back.
Prevent metal fragments or lead wire scraps from falling inside instrument. This
may cause electric shock, fire or malfunction.
The unit does not contain user serviceable parts.
Before starting, assemble the equipment while unplugged from an outlet.
Unit should never be used where it can fall or be pushed into water.
