43
Move the cursor to the item ‘Offset’ using the Arrow Keys.
Press ‘Enter’ with the cursor on the item ‘Offset’ and then ‘Up/Down’ to change
the offset value
Press ‘Enter’ to Confirm
Tip
►
The range of the ramp rate values goes from -10°C to 10°C.
The User can change the Ramp rate if needed. This feature allows controlling the heating and
cooling rate of the Objective Heater in order to avoid thermal shocks to the sample. To change
the Ramp Rate Value see Figure 31.
Menu 1/2
Select an Adapter
Offset
à
Objective Heater
8
Objective Heater 1/2
Enabled:
OFF
Offset:
0.0
à
Ramp °C/min 0.5
8
Enter to change the
Ramp Value
Confirm or
Exit
8
-
â
á
Up/Down until to
desired Ramp Value
Figure 31. Ramp rate changing.
From the main menu press the ‘Menu’ key on the front panel.
Move the cursor to ‘Objective Heater’ using the Arrow Keys.
Press ‘Enter’
Move the cursor to the item ‘Ramp’ using the Arrow Keys.
Press ‘Enter’ with the cursor on the item ‘Ramp’ and then ‘Up/Down’ to change
the offset value
Press ‘Enter’ to confirm
Tip
►
The ramp rate can be changed in the range 0.1 °C/min to 1 °C/min.
