35
The controller has four Function Buttons: “Menu”, “up”, “down” and “Enter” buttons.
Button functions
‘Menu’ button
To access the main menu, press “Menu”.
While a parameter is being modified, press “Menu” to escape without saving the parameter.
Use “Menu” button to go up or to exit from a “Sub Menu”.
‘Up and down’ buttons
Press “down” or “up” in order to change the value, when a numerical or logical value is
flashing.
Press “down” or “up” to move the cursor along the “Main Menu” items.
Press “down” or “up” to move the cursor along the parameters of a “Sub-Menu”.
Press “up” to silence for 30 seconds the audible alarm when active.
‘Enter’ button
Press “Enter” to have access to a “Sub-Menu” from the “Main Menu”.
Press “Enter” after modifying a value to confirm it.
Press “Enter” to change the set point temperature on the “Main Page”.
In the Run Mode, press “Menu” and “Enter” at the same time to enable Standby Mode. The
controller becomes inactive. Press ‘Enter’ for re-enabling it.
