Oki OKIFAX 5900 User Handbook Manual Download Page 64

Page: 64 / 109

Handbook

To send a delayed batch fax (One Session):

1 Load the document(s).

2 Press Menu/Exit key to enter the menu.

3 Press

to select

Delayed Batch TX

, press Enter .

4 Enter the Speed Dial number of the desired location using

the assigned One Touch key or the numeric keypad. Press
Enter.

5 Location and transmission time set displays. Press Start.

6 The machine scans the document(s) into memory, and

waits until the time programmed to begin transmission.

7 Repeat above steps 1-7 to prepare multiple sessions.

Only locations programmed into Speed Dial numbers

31-40 are applicable.

Enter times following the 24-hour format. For example,
0800 is 8:00AM, 2000 is 8:00PM.

There is no limitation to the number of batch
transmission sessions to set using Speed Dial numbers
31-40; however, no more sessions will be accepted once
memory is filled.

Canceling Delayed Transmissions

Follow the instructions provided below to cancel a delayed
transmission before it has been sent.

1 Press Stop.

2 The display shows

Cancel Communication

3 The display shows Location ID or Tel. No. of the delayed

transmissions currently programmed in the machine.

4 Press

to select transmission to cancel. Press

Enter.

5 The Location ID and Tel. No. of the selected transmission

will display. After confirmation, press Clear.

6 Selected transmission will be canceled.

7 For a delayed transmission from the document tray, press

Stop again to remove the document.

8 Press Menu/Exit to return to standby mode.

Summary of Contents for OKIFAX 5900














































































































Search results

Summary of Contents for OKIFAX 5900

Reviews:

Brands by name

Popular brands

Oki OKIFAX 5900, User Handbook Manual

Search results

Summary of Contents for OKIFAX 5900

Reviews:

Brands by name

Popular brands