Handbook
|
51
Rejecting Unsolicited Fax Messages
The machine provides a closed network function that allows
refusal of unsolicited faxes such as advertising. If activated,
when there is an incoming call, the machine compares the
TSI (CIG) with the last four digits of the programmed Speed
Dial numbers. If there is no match, the incoming call is
refused. The machine can also be set to neither send nor
receive faxes form locations whose telephone numbers are
not programmed into the speed Dial memory.
The available settings are:
•
Limited reception (RX)
•
Limited transmission and reception (TX/RX
•
No limitations (OFF).
To set a closed network:
1 Press Menu/Exit to enter the menu.
2 Input speed access number 21 (Closed Network); wait.
3 When
Closed Network
displays, press
Ä
or
¶
to select a
setting, press Enter.
4 Press Menu/Exit to return to standby mode.
Power Failures and Memory
Your fax machine is equipped with a battery to prevent the
loss of data stored in memory at the time of a power outage.
The typical memory-backup time with a fully charged battery
is 72 hours. If data is still held in memory at the time of
power restoration, the machine will continue operations from
the point when power was lost. If the data in memory has
been lost at the time of power restoration, the machine prints
out a Power Outage Report. Use this report to determine
which received messages you may have lost, and which
transmissions you may have to resend.
