1.4
Cleaning inside the Printer.
Toner can adhere to the metal shaft that is located in between the fuser and the cyan
image drum cartridge depending on the print pattern. Perform cleaning of the inside of
the MFP if toner has adhered to the metal shaft.
•
Turn OFF the power of the MFP.
•
Pull the document table lock lever to the front to release the lock, and raise
the document table. Then Press the top cover button and open the top cover.
•
Remove the four image drum cartridges from the MFP.
Drum Cartridges
•
Cover the removed image drum cartridge with a black paper.
Note!
Use caution when handling the image drums. Be very careful not to expose the
image drum to direct sun light or intense light. Do not leave it out under normal
illumination even indoors for 5 minutes or longer
.
•
Remove the fuser unit from the MFP.
Caution
Failure to proceed with caution may result in burn injury. The fuser unit gets
very hot. Do not touch the surface of the fuser unit.
•
Raise the fuser unit lock lever (shown in blue) in the direction shown by the
arrow.
6
