Printed Sheets Counter Display
This self-diagnostic menu is used to display the number of printed sheets status of the MFP.
1.
Enter the self-diagnostic mode and press the
(2) key
or
(8) key
until
[PRINTER STATUS]
is displayed on the screen.
Press the
(6) key
to execute.
The
(2) key
increments the test item and
(8) key
decrements the test item.
2.
When the
(2) key
or
(8) key
is pressed, number status of the printed sheets are
displayed in order. Pressing the
(*) key
or the
(#) key
is invalid.
When the
(4) key
is pressed, the screen exits the test. (Screen returns to the item 1
condition.)
Display
Unit of Measure
Details
K – IMPRESSIONS
Images
Y – IMPRESSIONS
Images
M – IMPRESSIONS
Images
C – IMPRESSIONS
Images
Number of printed sheets for each
color are displayed.
TOTAL SHEET CNT
Prints
Total number of printed sheets
are displayed.
2.7.7 Factory/Shipping Mode Switching
This self-diagnostic menu is used to switch the PU PCB from the Factor mode to the
Shipping mode.
1.
Enter the self-diagnostic mode
(Level 1)
and press the
(2) key
or
(8) key
until the
following message is displayed.
2.
When the
(6) key
is pressed, the following message is displayed.
Press the
(2) key
or
(8) key
until the desired item (refer to the table below) is displayed.
3.
While desired item to set is being displayed, press the
(6) key
to enable operator to
select the setting value.
4.
While desired item to set is being displayed, press the
(6) key
for an extended time (3
seconds) to register the display value in
EEPROM
. Screen returns to the item 2
condition.
When the
(4) key
is pressed, the screen exits the test. (Screen returns to the item 1
condition.)
43
