2.7.4 Color Registration Error Correction Test
This self-diagnostic menu is used for adjustment and to investigate cause of the color
registration error of the MFP.
1.
Enter the self-diagnostic mode (Level 1) and press the
(2) key
or
(8) key
until
[TEST PRINT]
is displayed in the top of the screen.
2.
When the
(6) key
is pressed, the following message is displayed.
Press the
(2) key
or
(8) key
until the desired item is displayed.
3.
When the
(6) key
is pressed, test of the item that is being displayed on the panel is
implemented.
<< When
REG ADJ EXECUTE
is executed >>
•
The color registration correction test is implemented. (The
[ON LINE]
lamp
blinks.)
•
When the test is complete, the test result (OK or error name) is displayed in the
upper column of the display window and
**** RESULT
is displayed in the
lower column of the display window.
When the
(2) key
is pressed, test results are incremented and displayed in order.
When the
(8) key
is pressed, test results are decremented and displayed in order.
When the
(4) key
is pressed, screen returns to the item 2 status.
•
When the
(#) key
is pressed while the test in progress, the test is interrupted (the
[ON LINE]
lamp lights) and screen returns to the item 2 status.
<<
REG ADJ RESULT
is executed >>
The key operations are the same as those above.
<< When
BLT REFLECT TEST
is executed >>
•
The color registration error correction belt reflection test is implemented. (The
[ON LINE]
lamp blinks.)
•
When the test is complete, the test result (OK or error name) is displayed in the
upper column of the display window and
**** RESULT
is displayed in the lower
column of the display window.
The key operations are the same as those above.
39
