Control Panel Key Test
Checks if the MFP responds normally when the hardware key and the software key on
the control panel is pressed, by observing the LCD screen if the pressed key is displayed
or not on the LCD screen. This test aims at checking all of the keys. Therefore, all keys
should be pressed in the
specified order
in order to check that all keys have been pressed.
Operating procedure
When this test is selected, the panel key test screen is displayed as shown below. Press all
of the keys in the
specified order
as shown in the picture below.
When a key is pressed in the specified order, the following messages are displayed.
18
When a key is pressed in a wrong order, the following messages are displayed.
