35
2.7.3
Test Print
This self-diagnostic menu is used to print the test pattern contained in the PU. Other test
patterns are contained in the controller.
1.
Enter the self-diagnostic mode
(Level 1)
and press the
(2) key
or
(8) key
until
[TEST PRINT] is displayed in the top of the screen.
Press the
(6) key
to execute.
The
(2) key
increments the test item and
(8) key
decrements the test item.
2.
The setting items that are applicable to the test print only are displayed in the lower
column of display window. Press the
(2) key
or the
(8) key
until the corresponding item
is displayed. (When the setting value for each item is not required
[Default setting]
,
advance to item 2.)
3.
Keep pressing the
(2) key
or the
(8) key
, and press the
(6) key
at the item that is set in
item 2. The setup item is displayed in the upper column, and the setting value is displayed
in the lower column of the display window.
(The setting value that is displayed last is applied.)
Pressing the
(4) key
determines the setting value, and the screen returns to item 2.)
Repeat item 3 as required.
Display Setup
Value
Function
PRINT EXECUTE
Pressing the (4) key starts
printing/Pressing the (#) key ends
printing (in page unit).
TEST PATTERN
0
0 = White paper print
1 to 7 Refer to next page. (Pattern print)
8 to 15 = White paper print
TRAY1
TRAY2
TEST CASSETTE
MPT Tray
Select the paper feed source.
If TRAY2 is not installed, TRAY2 is not
displayed.
PAGE
0000
Setting the number of test prints.
ON
COLOR
OFF
Selecting color or monochrome print.
ON is specified, ON/OFF setting for
each color appears.
2 PAGES STACK
OFF
DUPLEX
1PAGES STACK
Duplex print is executed with two sheets
stack.
Duplex print OFF select
Duplex print is executed with single
sheet stack.
LOW
MONO SPEED
HIGH
Selecting monochrome print speed.
LOW: 30ppm
HIGH: 34ppm(A4),33ppm(Letter)
