26
Tonal Send Test
Tonal test procedure
Press the [Tonal] button on the "Line Test” screen.
Select a signal to test.
When the [Stop] key is pressed, signal send is interrupted.
When the [Close] button is pressed, the screen returns to the “Line test” screen.
When the [Reset] key is pressed, screen returns to the top screen of the service menu.
DTMF Test
Signals of the frequencies that are used by the push-button telephone can be selected for
the send test.
DTMF test procedure
Press the [DTMF] button on the "Line Test” screen.
Select a frequency to send.
When the [Stop] key is pressed, signal send is interrupted.
When the [Close] button is pressed, the screen returns to the “Line test” screen.
When the [Reset] key is pressed, screen returns to the top screen of the service menu.
2.7
Printer Maintenance
Personality
Default setting of the PDL language that is supported by the respective destination
specification can be changed. The PDL language that has been set to” Disable” by the
PDL setting item will not be displayed as the choices on the following menu: [SETUP]-
[Admin Setup] - [Print Setup] . At the same time, when the print data of the PDL
language that has been set to “Disable” is received, a message “”Invalid data is received”
is displayed and the received data is discarded.
IBM 5577
Settings: Enable /Disable
Default: Disable
IBM PPR III XL
Settings: Enable /Disable
Default: Enable
EPSON
FX
Settings:
Enable
/Disable
Default:
Enable
HP-GL/2
Settings:
Enable
/Disable
Default:
Disable
Peak Power Control
Set whether or not to support the low peak power control. When the screen exits the
service menu after this setting is changed, the MFP reboots automatically.
Settings: Low / Normal
Default: Normal
