Fax memory full
There is not enough memory to send the fax job.
Touch
Continue
to clear the message.
Fax partition inoperative. Contact system administrator.
The fax partition appears to be corrupted. Try one or more of the following:
•
Touch
Continue
to clear the message.
•
Turn the printer off and then back on to reset the printer. If the message appears again, then contact your system
support person.
Fax server 'To Format' not set up. Contact system administrator.
The printer is in Fax Server mode, but the Fax Server setup has not been completed.
Try one or more of the following:
•
Touch
Continue
to clear the message.
•
Complete the Fax Server setup. If the message appears again, contact your system support person.
Fax Station Name not set up
The Fax Station Name has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
•
Touch
Continue
to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.
Fax Station Number not set up
The Fax Station Number has not been entered. Sending and receiving faxes is disabled until fax is configured properly.
Try one or more of the following:
•
Touch
Continue
to clear the message.
•
Complete the Analog Fax Setup. If the message appears again, contact your system support person.
Flushing buffer
Wait for the message to clear.
Insert staple cartridge
Try one or more of the following:
•
Insert a staple cartridge to clear the message.
•
Touch
Continue
to clear the message and print without using the staple feature.
Understanding printer messages
232
