Can receive but not send faxes
These are possible solutions. Try one or more of the following:
T
HE
PRINTER
IS
NOT
IN
F
AX
MODE
On the home screen, touch
Fax
to put the printer in Fax mode.
T
HE
DOCUMENT
IS
NOT
LOADED
PROPERLY
Load the original document faceup, short edge first into the ADF or facedown on the scanner glass in the upper
left corner.
Note:
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
M
AKE
SURE
THE
SHORTCUT
NUMBER
IS
SET
UP
PROPERLY
•
Check to make sure the shortcut number has been programmed for the number that you want to dial.
•
As an alternative, dial the telephone number manually.
Received fax has poor print quality
These are possible solutions. Try one or more of the following:
R
E
-
SEND
THE
DOCUMENT
Ask the person who sent you the fax to:
•
Check that the quality of the original document is satisfactory.
•
Resend the fax. There may have been a problem with the quality of the telephone line connection.
•
Increase the fax scan resolution, if possible.
T
HE
TONER
MAY
BE
LOW
When
88 Cartridge low
appears or when you experience faded print, replace the cartridge.
M
AKE
SURE
THE
FAX
TRANSMISSION
SPEED
IS
NOT
SET
TOO
HIGH
Decrease the incoming fax transmission speed:
1
Type the printer IP address into the address field of your Web browser.
Note:
If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click
Settings
.
3
Click
Fax Settings
.
4
Click
Analog Fax Setup
.
Troubleshooting
269
