Tray linking does not work
These are possible solutions. Try one or more of the following:
L
OAD
THE
SAME
SIZE
AND
TYPE
OF
PAPER
•
Load the same size and type of paper in each tray to be linked.
•
Move the paper guides to the correct positions for the paper size loaded in each tray.
U
SE
THE
SAME
P
APER
S
IZE
AND
P
APER
T
YPE
SETTINGS
•
Print a menu settings page and compare the settings for each tray.
•
If necessary, adjust the settings from the Paper Size/Type menu.
Note:
The multipurpose feeder does not automatically sense the paper size. You must set the size from the Paper
Size/Type menu.
Large jobs do not collate
These are possible solutions. Try one or more of the following:
M
AKE
SURE
C
OLLATE
IS
SET
TO
O
N
From the Finishing menu or Print Properties, set Collate to On.
Note:
Setting Collate to Off in the software overrides the setting in the Finishing menu.
R
EDUCE
THE
COMPLEXITY
OF
THE
JOB
Reduce the complexity of the print job by eliminating the number and size of fonts, the number and complexity
of images, and the number of pages in the job.
M
AKE
SURE
THE
PRINTER
HAS
ENOUGH
MEMORY
Add printer memory or an optional hard disk.
Unexpected page breaks occur
I
NCREASE
THE
P
RINT
T
IMEOUT
VALUE
1
Make sure the printer is on and
Ready
appears.
2
On the home screen, touch
.
3
Touch
Settings
.
4
Touch
General Settings
.
5
Touch the down arrow until
Timeouts
appears.
6
Touch
Timeouts
.
7
Touch the left or right arrow next to
Print Timeout
until the desired value appears.
Troubleshooting
261
