Oki F0305 User Manual Download

Page: 26 / 188

1-10 L

ayout

& I

nstaLLatIon

Plug in and power up

Plug the non-pronged end of the supplied AC power cord into the AC socket on the

machine and the pronged end into a properly grounded AC outlet.

Turn on the power switch. The markings are international standards:

I means on, O means off.

It will take a few seconds for the machine to warm up.

The machine will show:

Warming up

NOTE

While the power is on, the scanner lamp will always lights, but this does not mean

machine failure. See also “Scanner Sleep” on page 10-4.

Loading paper and adjusting the paper size setting

Please see “Paper handling” on pages 2-12 to 2-16.

Adjusting the speaker volume

Press <

copy

fax

scan

> to switch the machine to the fax mode.

Fax Ready

15 Oct 2007 13:30

Press <Monitor>.

Monitor



/Enter

Press [Enter]. You will hear a dial tone.

Press <



> or <



> to adjust the volume.

** Tel Mode **

Volume :

Press <Monitor> to hang up.

Summary of Contents for F0305





























































































































































































Search results

Summary of Contents for F0305

Reviews:

Related manuals for F0305

Brands by name

Popular brands

Oki F0305, User Manual

Search results

Summary of Contents for F0305

Reviews:

Related manuals for F0305

Brands by name

Popular brands