Oki F0305 Page 135 User Manual Download

Page: 135 / 188

9-9

ecurity

featureS

1
2
3
4
5
6
7
8
9
10
11
12
13
14
A

ecurity

fea

ture

Press <Enter>.

001:Name ;Upper

Use the numeric keys to enter the one-touch key name.

The name can hold up to 20 characters.

(Regarding how to enter characters, see “Entering character” on page 2-2.)
To change the name, press <

> or <

> to move the cursor, press <Cancel> to erase

the name. Then enter the correct name.

Press <Enter> to save the setting.

To enter another department code, repeat procedures from step 2.

To stop entering department codes, press <Reset>.

Erasing a department code

Press <Menu>, <3>, <3>, <3>, <Enter>.

Select Department No

001:987654321

NOTE

If the department code operation is protected, the machine beeps briefly and then

returns to the standby mode. You will have to turn off the protection first.

Press <

> or <

> to select the code you want to erase.

Press <Enter>. The following two displays will appear alternately:

001:Erase Dept. Code

Yes



Enter

001:Erase Dept. Code



Cancel

Press <Enter> to erase the code.

To cancel, press <Cancel>.

To erase another department code, repeat procedures from step 2.

To cancel, press <Reset>.

Turning the department code setting on and off

NOTE

To turn the department code setting on, at least one department code must exist in your

machine.

Press <Menu>, <3>, <3>, <4>, <Enter>.

Fax Department :Off



/Enter

NOTE

If the department code operation is protected, the machine beeps briefly and then

returns to the standby mode. You will have to turn off the protection first.

Press <

> or <

> to select “On” or “Off” for fax department management.

Summary of Contents for F0305





























































































































































































Search results

Summary of Contents for F0305

Reviews:

Related manuals for F0305

Brands by name

Popular brands

Oki F0305, User Manual

Search results

Summary of Contents for F0305

Reviews:

Related manuals for F0305

Brands by name

Popular brands