Oki ES7131, User Manual

Page: 65 / 137

- 65 -
List of Setup Menu
2
2.
Changing Printer Settings
Admin Setup
In order to access [ Admin Setup ] menu, an administrator password is required. For details, see
“Admin Setup” P.47 .
In Factory Default column, [*L] indicates Letter for the Paper Size default setting and [*A] indicates A4 for the Paper Size
default setting. Factory Default setting for the Paper Size differs depending on the printer.
Item Value
Factory
Default
Descriptions
Enter Password ************ aaaaaa Enters a password to enter
Admin Setup menu.
The default value is
aaaaaa.
From 6 to 12 digits of
numbers or Roman
character to input.
Network Setup TCP/IP Enable
Disable
* Sets Enable/Disable of
TCP/IP Protocol.
IP Version IP v4
IP v4+v6
IP v6
* Set up the IP version.
NetBIOS over TCP Enable
Disable
* Sets Enable/Disable
of NetBIOS over TCP
Protocol.
IP Address Set Auto
Manual
* Sets the IP address setting
method.
IPv4 Address xxx.xxx.xxx.xxx Sets the IP address.
Subnet Mask xxx.xxx.xxx.xxx Sets the subnet mask.
Gateway Address xxx.xxx.xxx.xxx Sets the Gateway (default
router) address.
0.0.0.0 means that there
is no router.
Web Enable
Disable
* Sets Enable/Disable of
Web.
Telnet Enable
Disable *
Sets Enable/Disable of
Telnet.
FTP Enable
Disable *
Sets Enable/Disable of
FTP.
IPSec Enable
Disable *
Displayed only when
Enable is selected for
TCP/IP and allows a
change only to Disable.
SNMP Enable
Disable
* Sets SNMP of FTP.
Network Scale Normal
Small
* When Normal is selected,
it can work effectively
even when it is connected
to HUB that has a
spanning tree feature.
Gigabit Network Enable
Disable *
Sets Enable/Disable of
Gigabit network.
Hub Link Setting Auto Negotiate
100Base-TX Full
100Base-TX Half
10Base-T Full
10Base-T Half
* Sets a method to link with
HUB.
TCP ACK Type1
Type2
* Sets a type of TCP
Acknowledgment.