Oki ES7131, User Manual

Page: 113 / 137

- 113 -
Network Setting Items
4
4.
Network Settings
„
IP Filtering
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Configuration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Mac)
IP Filtering - - ENABLE Set whether to use IP filtering,
the function to restrict
access by IP address. This
function requires thorough
knowledge of IP addresses.
Normally, select [ DISABLE ].
Set the items below properly
when selecting [ ENABLE ];
otherwise, no access using
TCP/IP is allowed.
DISABLE
Start Address 1-10 - - 0.0.0.0 Specify the IP addresses
that are allowed to access
the printer. You can specify
an individual address or an
address range. Specify the
start address and end address
when setting the address
range. Entering “0.0.0.0”
disables the setting.
End Address 1-10 - - 0.0.0.0
Printing 1-10 - - ENABLE Set whether to allow to
changes to the configuration
from the IP addresses specified
in IP Address Range #1-10.
DISABLE
Configuration 1-10 - - ENABLE Set whether to allow to
change configuration from the
IP addresses specified in IP
Address Range #1-10.
DISABLE
Administrator’s IP Address to
Register
- - 0.0.0.0 Set the IP address of the
administrator. Only this
address can always access the
printer. Remember that when
the administrator accesses the
printer via a proxy server, this
item is set to the address of
the proxy server and all access
via the proxy server is allowed.
It is recommended that the
administrator accesses the
printer without using a proxy
server.