- 130 -
Other Operations
4
4.
Network Settings
8
Click [
Start
] and select
[
Administrative Tools
]>[
DHCP
] to
launch the [
DHCP
] wizard.
9
On the DHCP list, select a server to use.
10
From the [
Action
] menu, select [
New
Scope
].
11
On the [
New Scope Wizard
], follow the
on-screen instructions and configure the
settings as necessary.
Memo
● Be sure to configure the default gateway settings.
●
On the [
Activate Scope
] screen, select [
Yes, I
want to activate the scope now
].
12
Click [
Finish
].
13
Select the new scope from the DHCP list
and then select [
Reservations
].
14
From the [
Action
] menu, select [
New
Reservation
].
15
Configure the settings.
16
Click [
Add
].
17
Click [
Close
].
18
From the [
File
] menu, select [
Exit
].
Configuring Your Printer
The following explains how to configure your
printer to use DHCP/BOOTP.
Note that since the DHCP/BOOTP protocol is
enabled by factory default, you do not have to
perform this procedure.
Memo
●
The following steps are explained using Network Card
Setup as an example. The steps and menus may differ
depending on the software you use.
1
Turn on the printer.
2
Turn on your computer and insert the
software DVD-ROM.
3
Click [
Run Setup.exe
].
If the [
User Account Control
] dialog box
appears, click [
Yes
].
4
Read the license agreement and click
[
Agree
].
5
Read the [
Environmental advice for
Users
] and then click [
Next
].
6
Select a device to be used and then click
[
Next
].
7
Select [
Network connection
] and the
click [
Next
].
8
Click [
Device Network Setup
].
9
Select your printer from the list and click
[
Next
].
10
Enter the IP address and then click
[
Setup
].
11
Enter the password at [
Password
] and
then click [
OK
].
- The factory default password is the last six
digits of the MAC address.
- The password is case-sensitive.
The network card reboots to enable the new
settings.
12
Click on [
Exit
].
Summary of Contents for ES7131
Page 1: ......
Page 137: ...45489302EE...