Oki ES7131, User Manual

Page: 111 / 137

- 111 -
Network Setting Items
4
4.
Network Settings
„
Maintenance
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Configuration
Tool
(Network
Setting Plug-in)
Network
Card
Setup
(Mac)
LAN Scale Setting - - NORMAL [ NORMAL ]: Normally, use this
setting. Even if connecting to
a hub with a spanning tree
function, the printer works
efficiently. If connecting to
a small LAN only for few
computers, it will take a long
time to start up the printer.
[ SMALL ]: This setting supports
from a small LAN for few
computers to a large LAN. If
connecting to a hub with a
spanning tree function,
the printer may not work
efficiently.
SMALL
„
General Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
Web browser
Configuration
Tool
(Network
Setting Plug-in)
Network
Card
Setup
(Mac)
Gigabit network - - ENABLE Specify the support for a
gigabit network.
When enabled, high-speed
connection with 1000Base-T
Full/Half is supported, but the
printer does not enter the sleep
mode if operated in such an
environment.
DISABLE
HUB Link Setting - - AUTO NEGOTIATION Specify the communication
speed and communication
method between the printer
and a hub. Normally, set to
[ AUTO NEGOTIATION ].
100BASE-TX FULL
100BASE-TX HALF
10BASE-T FULL
10BASE-T HALF
TCP ACK - - Type1 Select the type of TCP
Acknowledgement.
When [ Type1 ] is selected, the
printer returns the response for
each packet.
When [ Type2 ] is selected, the
printer returns the response for
multiple packets at a time.
Selecting [ Type2 ] may
improve the printing time in
case the printing time has
become longer due to the
setting of the hub. Normally,
select [ Type1 ].
Type2