Windows: Postscript Emulation Driver • 230
Duplex Printing (Printing on Both Sides of The Paper)
Me and 98
•
Paper weight range 20 to 28 lb. US Bond (75 to 105 g/m
²
).
•
Paper must be loaded print side
up
.
•
Any tray (Tray 1, optional Tray 2, MP tray) can be used for duplex
printing.
1.
Open the file in your application and select
File
→
.
2.
In the Print dialog box, click the Postscript emulation driver, then
click
Properties
.
NOTE
The optional duplex unit must be installed in the printer
and enabled before duplex printing can be carried out.
NOTE
These instructions explain how to change the settings
as you are printing a job. If you wish to change the
settings to apply to all jobs:
• Click
Start
→
Settings
→
Printers.
• Right click the Postscript emulation printer, then
select Properties.
• Follow steps 3, etc., below. Note that the Properties
screen for setting defaults will have more tabs.
Summary of Contents for C5400 Series
