Oki BV1250, Technical Reference

Page: 155 / 198

BV1250 Technical Reference On-line Commands – Line Information
Revision 1.0 Page 111
EXAMPLE(S)
SET-TRK n n
#SET-TRK 1 2
Port_Num=1 ACT_Trunk_Group_Num=4 SBY_Trunk_Group_Num=2
...SET-TRK Command End. [Fri Jan 31 14:29:23 1997]
#
GET-TRK
#GET-TRK
Port_Num=1 ACT_Trunk_Group_Num=2 SBY_Trunk_Group_Num=4
Port_Num=2 ACT_Trunk_Group_Num=1 SBY_Trunk_Group_Num=1
Port_Num=3 ACT_Trunk_Group_Num=3 SBY_Trunk_Group_Num=2
Port_Num=4 ACT_Trunk_Group_Num=4 SBY_Trunk_Group_Num=3
(Because the parameters are omitted, continues for the port numbers.)
...GET-TRK Command End. [Fri Jan 31 14:31:23 1997]
#
RST-TRK n
#RST-TRK 1
Port_Num=1 ACT_Trunk_Group_Num=2 SBY_Trunk_Group_Num=*
...RST-TRK Command End. [Fri Jan 31 14:34:23 1997]
#
ERRORS
No. 0101:
Cause - Port number value out of range
Remedy - Change value and retry
No. 0102:
Cause - Trunk group value out of range
Remedy - Correct value and retry
No. 0103:
Cause - Line type value out of range
Remedy - Correct value and retry