Oki BV1250, Technical Reference, Page: 58 / 198

On-line Commands – Command List BV1250 Technical Reference
Page 14 Revision 1.0
Table 4-1: Command Summaries (Continued)
No. Name Function Argument Format Parameters
3-10
RES-NO
Restriction code Set
SET-RES-NO
P1=Restricted digits
(FXO Only) Get GET-RES-NO None
Reset RST-RES-NO P1=Restricted digits
3-11 SPD
(FXO Only)
Speed dial numbers Set SET-SPD P1=Speed dial code (1-20)
P2=Telephone number
Get GET-SPD P1=Speed dial code
*
RST
RST-SPD
P1=Speed dial code
3-12 TGN
(EM/FXO Only)
Trunk group numbering Set SET-TGN P1=Trunk group number
P2=Deleted digits in called number
Get GET-TGN P1=Trunk group number
*
3-13 TRKROU
(EM/FXO Only)
Trunk hunt routing priority Set SET-TRKROU P1=Hunt pattern number
P2=Priority
P3=Trunk group number
Get GET-TRKROU P1=Hunt group number
*
Reset RST-TRKROU P1=Priority P2=Priority
3-14 VOICESP Voice access code Set SET-VOICESP P1=Access code number
Get GET-VOICESP None
Reset RST-VOICESP None
Line Information Commands (4-1 to 4-10)
No. Name Function Argument Format Parameters
4-1
AGC
BV1250 port AGC
configuration Set
SET-AGC
P1= Port number
P2= AGC disabled: 0, enabled: 1
P3= AGC level in dB (-60 to 3)
*
Get
GET-AGC
P1=Port number*
4-2 AP-SYSDLD BV1250 AP ringer
configuration Set SET-AP-SYSDLD P1=Ringer frequency
P2= Ringer interval
P3= Disconnect pulse signal
P4 = Disconnection type
*
Get
GET-AP-SYSDLD
None
Reset RST-AP-SYSDLD None
4-3 CO-TRMDLD
(FXO Only)
Circuit download Set SET-CO-TRMDLD P1=Port number
P2=Dial speed
P3=Wink-start width
P4=Speed record
P5=Guard timing
Get GET-CO-TRMDLD P1=Port number
*
Reset
RST-CO-TRMDLD
P1=Port number
4-4 DISC Disconnection timer Set SET-DISC P1=Disconnect time
(EM/FXO Only Get GET-DISC None
*
Optional