Oki BV1250, Technical Reference

Page: 27 / 198

BV1250 Technical Reference Maintenance and Troubleshooting
Rev. 1.0 Page 11
Table 2-2: Fault Conditions
Code Code
Detail
Equipment Message Type Fault
Abbreviation
SEQ Fault Explanation Alarm Lamp Comments and Corrective Action
On event On restore
00 00 SYSTEM Report PowerON 00 Power ON Off -- No trouble.
01 Report ResetKey 00 Reboot by reset key Off -- No trouble.
02 Report Shutdown 00 Shutdown Indication Off -- No trouble.
03 Report ComReboot 00 Reboot by command Off -- No trouble.
04 Report FaultRst 00 Reboot by fault Off -- No trouble.
05 Fault EMG Mode 00 Emergency startup On -- See remedies message.
06 Report NonOFD 00 No office data On -- See remedies message.
07 Report BadOFD 00 Office data error On -- Reinstall OFDD.VHO and restart.
08 Report NonTerm 00 Terminal information
not registered On -- Register terminal information and
restart system.
09 Report NonSYD 00 No system data On -- Transfer system files.
0A Report BadSYD 00 System data error On -- Transfer system files.
OB Fault PpTypeNG 00 PP category mismatch On -- Check PP category and correct
mismatch.
0C Report NonDNS 00 No DNS data On -- If is needed, transfer DNS data
0D Report BadDNS 00 DNS data error On -- Transfer DNS data
0E Report BadH323 00 H.323 port No. error On -- Correct H.323 port number.
0F Report BadNETDAT 00 Network address error On -- Correct network address
10 Fault SOS Call 00 SOS call On -- Contact customer service.
11 Fault CpuEx 00 CPU exception On -- Contact customer service.
12 Fault K Fatal 00 K_fatal call On -- Contact customer service.
13 Fault TF OVF 00 Infinite loop detected On -- Contact customer service.
15 Fault SystemMsg 00 System message error Off -- No trouble.
16 Fault 00 No DSP program-1 On -- Contact customer service