Oki BV1250, Technical Reference

Page: 120 / 198

On-line Commands - Numbering Plan BV1250 Technical Reference
Page 76 Revision 1.0
Item 3-8:
HNTPTN (SET, GET,
and
RST)
CLASS Numbering plan command
FUNCTION
Commands used to set, reset, and get Hunt-pattern number and Destination number for BV1250 E&M
and BV1250 FXO units.
CHARACTERISTICS
SET- HNTPTN
Writes Hunt-pattern index number, pattern number, and destination number to BV1250 unit
Input Parameter(s):
P1 - Hunt-pattern index number entered as a number from 1 to 128
P2 - Hunt-pattern number entered as a number from 1 to 4
13
P3 - Destination number entered as a number from 1 to 32 digits
P4 - Response time entered as a value in seconds (0 – 180 or Omit).
Output Parameter(s):
Displays current (ACT) and new (SBY) parameters for Hunt-pattern index, pattern, destination
numbers and response time
GET- HNTPTN
Displays current (ACT) and standby (SBY) Hunt-pattern index, pattern, and destination numbers, and
response time
14
Input Parameter(s):
None
Output Parameter(s):
Displays current (ACT) and new (SBY) parameters for Hunt-pattern index, pattern, destination
numbers, and response time.
RST- HNTPTN
Resets (deletes) Hunt-pattern parameters
Input Parameter(s):
P1 - Hunt-pattern index number entered as a number from 1 to 128
Output Parameter(s):
None. Subsequent GET requests return * (asterisk) symbols for all parameters.
ACCESS
SET- HNTPTN: RS-232C and LAN
GET- HNTPTN:
RS-232C and LAN
RST-HNTPTN
:
RS-232C and LAN
13
The same Hunt-pattern number can be assigned to multiple (different) destination numbers.
14
Returns Hunt-pattern information for currently registered numbers only.