Oki BV1250, Technical Reference

Page: 88 / 198

On-line Commands - Equipment BV1250 Technical Reference
Page 44 Revision 1.0
Item 1-15:
SNMP-TRPDST (SET, GET,
and
RST)
CLASS Equipment command
FUNCTION
Commands used to set, reset and get SNMP Trap destination of BV1250
CHARACTERISTICS
SET-SNMP-TRPDST
Writes from 1 to 3 SNMP trap destination IP addresses to a BV1250 unit and displays new address. IP
address set in the first parameter (P1) is of the highest priority
7
Input Parameter(s):
P1 - Input for SNMP trap IP address 1, entered in standard IP format which consists of numeric
values separated by period in the range of 0 ~ 255 in decimal notation (Range is nnn when the
IP address is nnn.nnn.nnn.nnn)
P2 - Input for SNMP trap IP address 2, entered in standard IP format which consists of numeric
values separated by period in the range of 0 ~ 255 in decimal notation (Range is nnn when the
IP address is nnn.nnn.nnn.nnn)
P3 - Input for SNMP trap IP address 3, entered in standard IP format which consists of numeric
values separated by period in the range of 0 ~ 255 in decimal notation (Range is nnn when the
IP address is nnn.nnn.nnn.nnn)
Output Parameter(s):
Displays current (ACT) and new (SBY) parameters for SNMP trap IP addresses. Addresses
displayed in standard IP format which consists of numeric values separated by period in the range of
0 ~ 255 in decimal notation (Range is nnn when the IP address is nnn.nnn.nnn.nnn)
GET-SNMP-TRPDST
Returns current SNMP trap destination IP addresses in a BV1250 unit.
Input Parameter(s):
None
Output Parameter(s):
Displays current (ACT) and new (SBY) parameters for SNMP trap IP addresses. Addresses
displayed in standard IP format which consists of numeric values separated by period in the range of
0 ~ 255 in decimal notation (Range is nnn when the IP address is nnn.nnn.nnn.nnn)
RST-SNMP-TRPDST
Resets SNMP trap destination IP addresses in a BV1250 unit.
Input Parameter(s):
None
Output Parameter(s):
Displays current (ACT) and new (SBY) parameters for SNMP trap IP address(s) where the reset
(deleted) SNMP trap IP address is shown as ***.***.***.***.
ACCESS
SET-SNMP-TRPDST:
RS-232C and LAN
RST-SNMP-TRPDST: RS-232C and LAN
GET-SNMP-TRPDST: RS-232C and LAN
7
C
hecks for identical IP addresses are not performed in a parameter.