Respirators
39
Parameters
Parameters define how each respirator type is tested. Upon initial setup,
a regulation was selected. This selection can be changed in the settings.
Select the mask type, and the appropriate parameters will be displayed.
If for some reason, a change is needed for a specific regulation
(minimum passing fit factor, challenge pressure, etc.), An Administrator can create or duplicate
an existing regulation, and make the required changes. This is highly discouraged as the
regulations are in place as required. Regulations will be added or modified to the software when
changes or updates become available.
When clicking on the Update icon, The software will give a notification stating whether there is a
software update available or not. In the Setup section of the Setup options, there is an option to
turn on or off the ability for the software to automatically update. With the auto update turned
on, whenever there is a new release, the operator will be prompted to confirm that he or she
wants the update to occur.
About
In the About section, information is included for:
OHD Contact Information
Address: 2687 John Hawkins Pkwy, Hoover, AL 35244, USA Phone: +1-205-980-0180
Website:
Email:
[email protected], te[email protected]
Software version
Quick Links to useful websites
Summary of Contents for QuantiFit 2
Page 53: ...Appendix D CNP Diagram 52...
Page 108: ...Appendix D CNP Diagram 52...
