Respirators
38
Respirator List
OHD Logic Software comes with a pre-populated list of
respirators. Every effort is made to keep this respirator list
up to date, but if a respirator that is being used does not
appear on the list, it may be added. OHD would like to be
notified if a respirator is not listed
(
) so that we may update our
list, which will be distributed to our customers as updates
are completed.
Find the respirator manufacturer and model that will be
used for testing and turn that selection on with the toggle
switch.
When a respirator is turned on, it will become part of the
selectable respirator list when performing a fit test. When
respirators are no longer being used, the respirator may
be "turned off." This will in no way affect previous tests that have used this respirator.
To create a new respirator:
o
Click on the New button.
o
Type in the Manufacturer and Model Name.
o
Select Type of respirator (APR-Half, APR-Full, PAPR, Gas respirator, and SCBA). Each
respirator will have different testing parameters according to which regulation has been
selected for your testing.
An image may be uploaded so that the respirator can be seen when selected. The image target
size ideally should be 240 X 370 pixels, or it will be sized when importing.
Respirator Sizes
The default respirator sizes that are pre-programmed into the software include:
Small, Medium, Medium-Large, and X-Large.
The respirator sizes module allows the operator to add additional respirators sizes
if the need should arise. This could include sizes such as One-Size-Fits-All, X-Small,
etc. The operator may also delete sizes of respirators that are not a size used by a
specific respirator manufacturer. This would prohibit operators from selecting the wrong size by
mistake.
.
.
Summary of Contents for QuantiFit 2
Page 53: ...Appendix D CNP Diagram 52...
Page 108: ...Appendix D CNP Diagram 52...
