Navigation
11
The QuantiFit2 is operated by the color touch on the front of the instrument. When pressing any
button, there will be a “click
-
tone”
. The volume of this tone can be changed in the System
Settings menu. There are five major modules to select from:
People/Test
: Where people are added, edited, or imported,
and where tests are initiated.
Seal Check
: Holding this button will close off the air flow in
the respirator so that the test subject can do a user seal check.
Reports
: Reports that can be printed out or exported one at
a time, or by date, company, or group.
Daily Verification:
Used to perform the daily verification
requirement for each day of operation.
Settings
: Contains parameters that can be changed for the
convenience or requirement of the operator.
Other buttons you will see are:
ADD
–
This button will allow the user to add to the records currently viewed, e.g.,
person, respirator, etc.
ADMIN MENU
- Entry to a menu for secure and important settings
CANCEL
–
This button will close the current screen. Any values entered by the operator
on the screen will not be saved.
COMPANY
–
A separation of people into different groups, teams, companies, etc.
DAILY VERIFICATION
–
Will allow the user to perform a daily verification when the
initial daily calibration has already been completed
DELETE
–
Removes an item from a list
Summary of Contents for QuantiFit 2
Page 53: ...Appendix D CNP Diagram 52...
Page 108: ...Appendix D CNP Diagram 52...
