OHAUS MB45 Page 32 Instruction Manual Download

Page: 32 / 71

3 2

Analyzer setup - Section 5

5.9 Adjusting display contrast and brightness

This menu permits adjusting the contrast and brightness levels on the display screen. To change the levels,
proceed as follows:

ANALYZER SETUP

Press the

Setup

button. Using the down arrow button, scroll to DISPLAY.

Press the

Enter

button.

DISPLAY ADJUST

Adjusting contrast

Using the up/down arrow buttons, adjust the screen contrast to the
desired level. The numeric value (0 to 100) is for reference only. Press
the right arrow button to advance to BRIGHT. Default = 40.

LANGUAGE

BEEPER

TIME-DATE

RS-232

DISPLAY

CONTRAST:

BRIGHT:

EXIT WITHOUT SAVING

DISPLAY ADJUST

Adjusting brightness

Using the up/down arrow buttons, adjust the screen brightness to the
desired level. The numeric value (0 to 10) is for reference only. Press
the

Enter

button. Default = 10.

CONTRAST:

BRIGHT:

EXIT WITHOUT SAVING

Exit without saving

If you do not wish to save settings, Use the right arrow button and scroll
to EXIT WITHOUT SAVING and press the

Enter

button. The display returns

to ANALYZER SETUP.

DISPLAY ADJUST

CONTRAST:

BRIGHT:

EXIT WITHOUT SAVING

All manuals and user guides at all-guides.com

Summary of Contents for MB45








































































Search results

Summary of Contents for MB45

Reviews:

Related manuals for MB45

Brands by name

Popular brands

OHAUS MB45, Instruction Manual

Search results

Summary of Contents for MB45

Reviews:

Related manuals for MB45

Brands by name

Popular brands