2 4
Analyzer setup - Section 5
5. Analyzer setup
The Analyzer Setup menu is activated by pressing the
Setup
button. The menu contains: lockout, weight and
temperature calibration, language selection, beeper volume settings, time and date format, communication
settings, print criteria, display contrast and brightness settings, and factory reset. Please review this entire section
and the rest of the manual before making changes to the Analyzer. To gain access to any item in the menu,
you can use the arrow buttons to scroll up and down and press
Enter
to highlight your selection. To exit the
setup menu, press the
Display
button to return to a test or Test Menu to change the current test. A description of
each menu item and procedure follows:
5.1 Lock out
Selecting this entry, then setting Lock Out to ON locks out all changes from the Test Library and Analyzer Setup.
You would use this function after the Analyzer has been put into operation, and you do not want to change any
of the test or analyzer setup parameters. LOCK OUT is intended to protect against accidental menu changes.
Press the
Setup
button. Using the arrow buttons, select LOCK OUT.
ANALYZER SETUP
LOCK OUT
WEIGHT CAL
TEMP CAL
LANGUAGE
BEEPER
TIME-DATE
With LOCK OUT highlighted, use the arrow buttons to select either ON or
OFF and press the
Enter
button. After selection, the display returns to
ANALYZER SETUP menu.
LOCK OUT
LOCK OUT WILL LIMIT
ACCESS TO MENUS AND
SAVED SETTINGS / TESTS.
LOCK OUT:
OFF
EXIT WITHOUT SAVING
All manuals and user guides at all-guides.com
