OHAUS Defender 5000 Series, Instruction Manual

Page: 28 / 73

EN-26 Defender 5000 Indicators
For more details, see the table below.
Application Mode
& Discrete I/O
Options (bold is default)
Weighing
Enable
On , Off
Discrete Input1
Off , Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2 Off , Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1
Off , Overload, Underload, Zero
Discrete Output2 Off , Overload, Underload, Zero
Discrete Output3 Off , Overload, Underload, Zero
Discrete Output4 Off , Overload, Underload, Zero
Counting
Enable On , Off
Discrete Input1 Off , Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2 Off , Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1 Off , Overload, Underload, Zero
Discrete Output2 Off , Overload, Underload, Zero
Discrete Output3 Off , Overload, Underload, Zero
Discrete Output4 Off , Overload, Underload, Zero
Check
Enable On , Off
Discrete Input1 Off , Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Input2 Off , Zero, Tare, Clear Tare, Print, Unit, Accumulate
Discrete Output1
Off , Under, Over, Accept, Under/Over, Overload,
Underload, Zero
Discrete Output2
Off , Under, Over, Accept, Under/Over, Overload,
Underload, Zero
Discrete Output3
Off , Under, Over, Accept, Under/Over, Overload,
Underload, Zero
Discrete Output4
Off , Under, Over, Accept, Under/Over, Overload,
Underload, Zero
Percent
Enable
On , Off
Dynamic
Enable
On , Off
Discrete Input1
Off , Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Input2
Off , Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Output1 Off , Overload, Underload, Zero
Discrete Output2 Off , Overload, Underload, Zero
Discrete Output3 Off , Overload, Underload, Zero
Discrete Output4 Off , Overload, Underload, Zero
Reset
3.7 Weighing Unit
Enter this menu to activate the desired units. Default settings are bold .
NOTE: Due to national laws, the indicator may not include some of the units of measure listed. If the
Security Switch is set to ON, the Units are locked at their current setting.
3.7.1 Gram (g)
Set the status.
Off = Disabled
On = Enabled