EN-48 Defender 5000 Indicators
Method 2
1. Use the alphanumerical keypad to key in the
desired averaging time.
2. Once the value keyed in is displayed in upper
left portion of the screen, press the Softkey
corresponding to the icon
.
4.5.3 Input/Output (I/O) Setup
The I/O’s setup can be customized for various user preferences.
The I/O’s setup is defined below
(defaults in
Bold).
Item
Available Settings
Enable
On,
Off
Discrete Input 1
Off,
Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Input 2
Off,
Zero, Tare, Clear Tare, Print, Start, Reset
Discrete Output 1
Off,
Underload, Overload
Discrete Output 2
Off,
Underload, Overload
Discrete Output 3
Off,
Underload, Overload
Discrete Output 4
Off,
Underload, Overload
Note:
The I/O’s setup will only work when the I/O Option board has been installed. See the Accessory
list in section 9.4 for information.
The option I/O board provides two isolated inputs and four dry-contact
normally open relay outputs which can be used for simple process weighing.
Press the button
to enter the Main
Menu.
With the button corresponding to the icon
,
go down the list and highlight
Application
Mode
. Enter this sub-menu by pressing the
Softkey corresponding to the icon
.
In the Application Mode menu enter the sub-
menu
Dynamic
.
Select the list item and press the Softkey
corresponding to the icon
icon to change
the setting as desired. After completion of I/O
Setup, press the Softkey corresponding to the
icon
to return to the main application
screen.
