EN-34 Defender 5000 Indicators
4.1.3 Accumulation
To start
Accumulate
weighing data, place the
object on the pan and press the Softkey
corresponding
to
the
icon
.
The
accumulation icon will start blinking. The load to be
accumulated has to be >= 5d and the next
accumulation can only start once the pan has been
cleared.
When LFT is ON (no such limit when LFT is OFF
or the approved model is OIML),
a. gross weight and net weight cannot be
accumulated;
b. gross 0 has to be reached before a new sample
accumulation.
When LFT is OFF,
a. gross weight and net weight can be
accumulated;
b. a new sample can be accumulated after
reaching gross 0 or net 0.
Note:
The Accumulation icon
will only be
shown if
Accumulate
is set to
Manual
and
Automatic
(see section 4.1.1).
Viewing the Accumulation Results
To view the accumulation results, press the
Softkey corresponding to the icon
.
The
Accumulate Result
screen is displayed.
To clear the accumulation results, press the button
.
When the instructional message "Clear the
statistical data?" appears, press the Softkey
corresponding to the icon
.
To return to home screen press the Softkey
corresponding to the icon
.
Press the button
to print Accumulation result.
4.1.4 ID Input
Press Softkey corresponding to the icon
to
enter configuration screen.
User can press alphanumeric keys to input the ID
number. Then press the Softkey corresponding to
the icon
to confirm the input.
