Defender 5000 Indicators
EN-61
9. TECHNICAL DATA
9.1 Specifications
Materials
TD52XW Housing: stainless-steel
TD52P Housing: ABS plastic
Display window: polycarbonate
Keypad: polyester
Ambient conditions
The technical data is valid under the following ambient conditions:
Ambient temperature: -10°C to 40°C / 14°F to 104°F
Relative humidity: Maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to
50% relative humidity at 40°C.
Altitude: up to 2000m
Operability is assured at ambient temperatures between -10°C and 40°C.
TABLE 9-1 SPECIFICATIONS
Indicator Model
TD52P
TD52XW
Maximum displayed resolution
1:75,000
Maximum approved resolution
1:10,000
Maximum counting resolution
1:1,500,000
Weighing units
Kilogram, Gram, Pound, Ounce, Pound: Ounce, Tonne (Metric Tonne),
Ton (Short Ton), Custom
Weighing modes
Basic weighing, Percent weighing, Piece Counting with Optimized APW,
Animal weighing/Dynamic weighing, Check weighing
Display
Dot matrix LCD
Backlight
White
Controls
23 button membrane switch
Ingress protection
---
IP68
Load cell excitation voltage
5 VDC
Load cell drive
Up to 8 x 350 ohm load cells
Load cell input sensitivity
Up to 3 mV/V
Stabilization time
Within 2 seconds
Auto zero tracking
Off, 0.5 d, 1 d or 3 d
Zeroing range
2% or 100% of capacity
Span calibration
1 kg or 1 lb to capacity
Housing dimensions
(W x D x H)
320 X260 X80 mm
12.6 x 10.2 x 3.1 inch
Net weight
1.5 kg
2 kg
3.3 lb
4.4 lb
Shipping weight
2 kg
2.5 kg
4.4 lb
5.5 lb
Operating temperature range
-10 °C to 40 °C
14 °F to 104 °F
Mains power
100-240 VAC / 50-60 Hz internal power supply
Overvoltage category
II
I
Pollution degree
2
Battery power
Rechargeable battery pack (option)
Interfaces
RS232 (standard)
