
Effective April 2006
17
Safety Precautions
It is very important that you read the precautions below and make yourself aware
of the hazards of oxygen in general. While it can be handled and used very safely it can
also be mishandled or applied incorrectly causing dangerous situations.
1.)
Oxygen is a fire hazard.
It can be very dangerous as it vigorously
accelerates the burning of combustible materials. To avoid fire and/or the
possibilities of an explosion, oil, grease or any other easily combustible materials
must not be used on or near the oxygen generator. Smoking, heat and open
flames are also not recommended near the unit. Individuals who have
experience handling oxygen systems should become the designated operators of
the oxygen generator within your facility
.
2.)
Ensure that the oxygen outlet stream is not directed toward anyone’s
clothing.
Oxygen will embed itself in the material and one spark or hot ash from
a cigarette could ignite the clothing vigorously.
3.) In critical applications it is important to have a backup supply of oxygen, as it
should be remembered that the generator does not come with any reserve
storage tank and it does require electrical power to operate. Therefore
during
power outages oxygen will not be produced.
4.) As previously mentioned,
do not use extension cords to bring power to
the generator.
The current draw into the unit is high and could overheat some
extension cords. It is also important to use only a properly grounded outlet
.
5.)
High Pressure Oxygen may present a Hazard.
Always follow proper
operating procedures, and
open valves slowly
. Rapid pressurization may result
in personal injury. Safety glasses and hearing protection are required when
venting oxygen under high pressure.
Summary of Contents for OG-75
