background image

46

Caution, try not to crash the glass on the regulator and 

against the glass door of the bottle compartment.

Bring the glass gently to spout being careful not to damage 

the glass or the door.

Warning!

The dispenser is not able to determine the level 

of the wine in the bottle; in case the bottle is 

removed for manual use and reinserted into 

the dispenser, the preservation and correct 

dispensing of the wine will be compromised.

ABSOLUTELY DO NOT REMOVE THE BOTTLE DURING USE

Manual of Use

47

11. 

Display and visualization

of the system

The dispenser is equipped with a special function that can display the 

various states of the refrigerating that are inside the climate controlled 

dispensers.

On the screen you can view the working status of the refrigerator.

The letter that appears at the top right of the display indicates status.

In addition to the display of the refrigerator, you can monitor the sta-

tus of the rest of the system.

The display will show the letters that show the various activities being 

done by the system in real time:

Number

Function

1

Bottle empty or absent: 

G   EM

Full bottle inserted: 

G   OK

Analyzing bottle: 

G   AN

LEFT

RIGHT

10°C
15°C

W

G OK

C C

17.2 C

10°C

LEFT

INSTALLATION

WINE

1.00$

2.00$

3.00$

5

When the display indicates Bottle empty or absent: G   EM, 

the  machine  will  not  dispense  and  will  warn  with  the 
message on the display:

 

 

NO GAS 

51

Officine Gullo

Summary of Contents for WND 040

































































































Reviews: