36
N
2
OR
2x3AR
UL
8.11.2 Connections
1.
Location of the supply lines of the gas (cylinders, generator, etc.).
2.
Connect the gas lines to the gas supply and also to the pre-installed
inlets on the dispenser and pressurize the system according to the
instructions in
►
→
chap. 8.5.
3.
Check the stability of the dispenser.
4.
Connect the power supply cable to the dispenser.
Before connecting the cable to the power line socket, make sure
that the main switch is in the O (off) position and make sure the
voltage / frequency / power supplied match the values indicated on
identification label.
5.
Check the working conditions of the dispenser and check that there
are no leaks (air, nitrogen / argon, etc.).
Officine Gullo
40
