EN
7
Charge Battery
The device has a built-in rechargeable battery. No battery installation is required. Just
charge the device when it low battery capacity is indicated.
To charge the battery
, connect the device to any standard wall outlet via the DC-IN port
using the power adaptor. It takes about 5 hours to fully charge the battery.
Please note:
a.
You can operate the device even when it is being charged. But for extended battery life, it is
suggested NOT to use the device when it is charging.
b.
It is recommended to charge the battery before you use the device for the first time.
c.
For maximum performance, lithium-ion batteries need to be used often. If you do not use the
device often, be sure to recharge the battery at least once per month.
Install Memory Card
This device can read files directly from memory card.
To use a memory card, find the card slot at the bottom of the device and insert the memory
card in the correct orientation. To access the files stored in the memory card, enter
Explorer
mode by tapping the explorer icon and select the “EXTSD” directory.
•
Ensure that the microSD card is in correct orientation; the contacts must be on top, as
illustrated. Card and card reader can be damaged if the microSD card is inserted the
wrong way.
•
Press the microSD card into the slot until it clicks into place.
•
To remove the microSD card first slightly press to release it from the slot.
Please note:
We recommend only using microSD or SDHC cards up to 32GB capacity.
•
After inserting or removing a microSD card it can take several seconds before the
contents are updated.
•
Do not insert or remove the microSD card during operation; this can cause the device to
freeze.
•
Do not remove the microSD card while contents are played; this can cause the device to
freeze.
