ODES UTV Desertcross 1000cc-3, Maintenance Manual

Page: 204 / 230

10. ELECTRICAL SYSTEM
10-
4
Removal and Installation of Top Lamps
1
、
Remove the positive and negative connection of battery
。
2
、
Disconnect the positive power supply connected to the top lamp
。
3
、
Disassemble (1, bolt ;2, top lamp) in the sequence shown in the diagram
4
、
The order of installation is contrary to the order of disassembly
Removal and Installation of Top Lamp Control Switch
1
、
Open hood cover
。
2
、
Disconnect headlamp switch connector
。
3
、
Push the switch out of the back of the meter
。
4
、
Check the conductivity between the ignition switch
terminals with an ohmmeter and replace the switch
if it does not meet the technical requirements
。
Removal and installation of horn
1
、
Disconnect horn plug
。
2
、
Disassemble (1, bolt ;2, horn) in sequence shown in the diagram
。
3
、
The order of installation is contrary to the order of disassembly
。
Removal and installation of horn control switches
1
、
Open hood cover
。
2
、
Disconnect horn switch
。
3
、
Push the switch out of the back of the meter
。
4
、
Check the conductivity between the ignition
switch terminals with an ohmmeter and replace
the switch if it does not meet the technical requirements
。