10.CHASSIS
10-1
10. CHASSIS
EXHAUST SYSTEM ·································· 10-1 SILENCER INSPECTION ····························· 10-1
REAR SEAT ············································· 10-2 CAR ROOF ·············································· 10-3
HANDRAIL ············································· 10-3 SEAT ······················································ 10-4
CAR FRAME ············································ 10-5
EXHAUST SYSTEM
WARNING
Disassemble /install procedures
1
、
Disassemble vent pipe and silencer 2- connection bolt
。
2
、
Disassemble exhaust pipe and engine 2- joint nut
。
3
、
Disassemble the oxygen sensor from the exhaust pipe
and take out the exhaust pipe.
4
、
Disassemble silencer from the car frame
5
、
Disassemble the tailpipe of silencer, take out the fire retardant net.
SILENCER INSPECTION
1
、
Check the leaks in exhaust pipe and the cracks in
heat insulating shield.
。
2
、
Check whether the rubber parts in silencer are
cracked or weathered, etc.
3
、
Clean the sundries and inspect any damage in the
fire retardant net.
If there is any problem, please replace it with a new one.
Be careful not to operate when the engine is running or the silencer is at high temperature.
