2.PERIODIC MAINTENANCE
2-11
SUSPENSION SYSTEM
Lubricate both suspension arms with lithium-soap based grease. There are two grease fittings on each suspension
arm. Check operation and for leakage.
Grease fitting location of front suspension arms.
Lubricate the chain with lubricating oil.
CHAIN MAINTENANCE
The new chain is too long or extended after use, it is difficult to adjust, the chain link can be removed
according to the situation, but it must be an even number. The link should pass through the back of the chain, and
the opening of the locking piece should be in the opposite direction of rotation.
After the sprocket wears seriously, the new sprocket and new chain should be replaced at the same time to
ensure good meshing. It is not possible to replace new chains or sprockets alone. Otherwise, it will cause poor
meshing and accelerate the wear of the new chain or new sprocket.
The old chain can not be mixed with some new chains, otherwise it will easily cause impact in the
transmission and break the chain.
The chain should be filled with lubricant in time. Lubricating oil must enter the matching gap between the
roller and the inner sleeve to improve working conditions and reduce wear.
When the vehicle is stored for a long time, the chain should be removed and cleaned with kerosene or diesel,
then coated with engine oil or butter and stored in a dry place to prevent corrosion.
