Ochsner AIR BASIC 211 T201, Operating And Installation Manual

Page: 35 / 60

982017-AIR-BASIC-Multitower-T201-EN01.docx Page 35 of 60
6.3.4 Sensor
Figure 43: Electric schematic with buffer tank/low loss header
CAUTION Schematic diagram: The schematic does not include all fittings/safety elements/components
required for installation. Install the system according to the relevant standards and local guidelines!
KEY :
Low voltage cables must be routed away from
240 V/400 V cables!
a ) Heat pump terminal strip
1) Wiring, charging pump buffer/low-loss
header
2) Top buffer sensor TPO
3) Middle buffer sensor TPM
Configuration with buffer or low loss header:
2: Puffer 2 Fühler
ESC ENTER
06-076 WAERMEVERTEILER
Applikationstyp Wärmemanager
HEAT DISTRIBUTOR
Heat manager application type
2: Buffer 2 sensor