Ochsner AIR BASIC 211 T201, Operating And Installation Manual

Page: 42 / 60

982017-AIR-BASIC-Multitower-T201-EN01.docx Page 42 of 60
11 Appendix
11.1 Specification
Specification for T201 indoor unit
Height mm 1953
Width mm 688
Depth mm 803
Tilt height mm 2162
Empty weight kg 203
Filled weight kg 471
IP rating IP 20
Tank thermal insulation mm 90
Heat exchanger area m² 3.3
Heat exchanger capacity l 21
Hydraulic data
Hot water volume > 40° L 147.1
Primary heating water input power at flow rate, upper indirect coil
kW-
l/min
33.1/15.2
Pressure drop at 1.0 m3/h, indirect coil, top hPa 28
Reheating time, upper indirect coil Min 12.4
Max. operating temperature heating water °C 89
Application limits
Max. permissible pressure (Design Pressure) DHW cylinder MPa 0.7
Max. permissible pressure (Design Pressure), upper indirect coil MPa 0.3
Max. permissible temperature °C 89
Electrical details
Rated control voltage V 230
Control phases 1/N/PE
Control circuit fuse A 1xB16
Rated voltage, emergency/booster heater V 230
Phases, emergency/booster heater 2/N/PE
Emergency/booster heater fuse A 2x B16
Frequency Hz 50
Max. permissible mains impedance acc. EN 61000-3-11 Ω 0.358
Output data
Tested to standard EN 12897:2016
Values
Nominal design flow rate of heating system at A-7/W35 and 7 K m³/h 1.4
Heating flow rate (min.) m³/h 0.7
Safety assembly, max. supply pressure MPa 1.6
Recommended operating pressure - heating circuit MPa 0.2
Recommended operating pressure - DHW MPa 0.35
Pressure reducing valve, downstream set pressure MPa 0.35
T&P valve, nominal set temperature °C 90
T&P valve, nominal set pressure MPa 0.7
T&P valve, nominal dimension DN15
Expansion vessel pre charge-pressure, DHW MPa 0.35