Ochsner AIR BASIC 211 T201, Operating And Installation Manual

Page: 17 / 60

982017-AIR-BASIC-Multitower-T201-EN01.docx Page 17 of 60
4.1.3 Installation
4.1.3.1 Installation location
CAUTION
Do not install the appliance in damp
rooms!
Install the appliance in a frost free and dry room
near the draw-off point. In order to reduce line
losses, keep the distance between appliance and
heat pump small.
Ensure that the floor has adequate load bearing
capacity and is sufficiently level (for weight, see
section "Specification / Data table"). The room
must not be endangered by explosive dust, gases
or vapours.
If installing the appliance in a boiler room with
other heating appliances, ensure that their
operation is not affected.
Minimum clearances:
Figure 15: T201 minimum clearances
Minimum clearances to the side can be either to
the right or the left.
4.1.3.2 Dimension and connections