Ochsner AIR BASIC 211 T201, Operating And Installation Manual

Page: 3 / 60

982017-AIR-BASIC-Multitower-T201-EN01.docx Page 3 of 60
1 General information
1.1 Information on documentation
The following information is a guideline for the
complete documentation.
Please read your heat pump's operating manual
carefully from beginning to end. This will help you
to operate your heat pump better. This manual is
to be kept readily accessible near the heat pump.
The precautionary information provided below is
used in this document.
WARNING
Failure to observe this information
poses a risk of injury or death and may
lead to material damage. This
information must be observed without
fail.
CAUTION
Failure to observe this information
may lead to an appliance fault or
material damage. This information
should be observed.
NOTE
CAUTION
Information for work on electrical
systems. This information must be
observed without fail.
Caution - risk to life
1.2 Safety regulations
Read this manual through carefully before
commissioning the heat pump or making settings!
The appliance must not be converted or
modified in any way.
Work on the
appliance (repairs, modifications)
may only be carried out by authorised
bodies.
Turn off all mains fuses of the system
before carrying out any work on plug-
in strips or electrical connections
(wires).
Commissioning and servicing of the
appliances may only be carried out by
personnel authorised by OCHSNER.
Installation of the appliances and
their wiring may only be carried out
by a specialist in accordance with local
regulations.
The controller can be used to enable
functions to protect the heat pump.
However, since the controller is not
certified as a safety device, safety
measures in case of failure of or
damage to the heat pump (e.g.
additional external switching of the
safety devices in use) must comply
with local regulations.
CAUTION
Note that there is a risk of injury when
touching the outdoor unit. This applies
in particular to AIR BASIC 618 without
a cover grille.
WARNING
Do not use the appliance as a step or
platform. Do not climb on the
appliance or place any loads on it.
In the event of upgrades/updates to the controller
software, all function parameters of the heat
pump should be checked.
1.3 CE designation
The product you have purchased conforms to the
technical regulations valid at the time and is
compliant with CE standards.